<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0" xmlns:media="http://search.yahoo.com/mrss/">
 	<channel>
		<title>Tech Talk | xmir</title>
		<link>http://www.xmir.org/tech-talk/</link>
		<description></description>
		<language>en</language>
		<lastBuildDate>Mon, 04 May 2026 21:46:26 +0200</lastBuildDate>
		<docs>http://blogs.law.harvard.edu/tech/rss</docs>
		<generator>Sandvox 2.10.12</generator>
		<item>
			<title>The little router that could...</title>
			<link>http://www.xmir.org/tech-talk/the-little-router-that.html</link>
			<description>
				&lt;div class="article-summary"&gt;&lt;p&gt;Finding a router that satisfies OpenSim’s requrement for NAT loopbacking the UDP protocol, or hairpinning, is really challenging and is one of the most asked technical questions in OpenSim related forums. 
					&lt;/p&gt;&lt;p&gt;After a good search we landed on the Ubiquity Network’s &lt;a href="https://www.ubnt.com/edgemax/edgerouter-x/" target="_blank"&gt;&lt;em&gt;Edge&lt;/em&gt;Router X&lt;/a&gt; which is both cheap and capable. It runs Ubiquity’s EdgeOS operating system and is the smalest of a series of routers that can satisfy up to very demanding routing requirments.  Even as the most basic member of the family it can be managed by &lt;a href="https://unms.com/" target="_blank"&gt;UNMS&lt;/a&gt;™ (Ubiquiti® Network Management System), a comprehensive controller also available on iOS and Android devices.
					&lt;/p&gt;
					&lt;div class="first graphic-container wide center ImageElement"&gt;
						&lt;div class="graphic"&gt;
							&lt;div class="figure-content"&gt;
								&lt;!-- sandvox.ImageElement --&gt;&lt;img src="http://www.xmir.org/_Media/ubiquiti_networks-edgeroute_med.jpeg" alt="ubiquiti networks edgerouter x" width="580" height="281" /&gt;
								&lt;!-- /sandvox.ImageElement --&gt;&lt;/div&gt;
						&lt;/div&gt;
					&lt;/div&gt;&lt;p&gt;Setting it up for OpenSim after initial configuration basically means mapping ports to hosts in the Port Forwarding tab of the Firewall/NAT tab of the Edgerouter management screen.  You also need to enable hairpin NAT in the same tab. 
					&lt;/p&gt;
					&lt;div class="not-first-item graphic-container wide center ImageElement"&gt;
						&lt;div class="graphic"&gt;
							&lt;div class="figure-content"&gt;
								&lt;!-- sandvox.ImageElement --&gt;&lt;img src="http://www.xmir.org/_Media/enable-nat-hairpin_med.png" alt="Enable NAT hairpin" width="580" height="31" /&gt;
								&lt;!-- /sandvox.ImageElement --&gt;&lt;/div&gt;
						&lt;/div&gt;
					&lt;/div&gt;&lt;p&gt;As mentioned above it will loopback UDP ports, while many routers only will loopback TCP. This is even true for otherwise sophisticated and expensive Cisco business routers. 
					&lt;/p&gt;
				&lt;/div&gt;
			</description>
			<pubDate>Sat, 15 Sep 2018 11:26:19 +0200</pubDate>
			<guid>http://www.xmir.org/tech-talk/the-little-router-that.html</guid>
            
			
		</item>
		<item>
			<title>Alias the loopback address for your grid on macOS</title>
			<link>http://www.xmir.org/tech-talk/alias-the-loopback-address.html</link>
			<description>
				&lt;div class="article-summary"&gt;&lt;p&gt;For most smaller grids and even standalone installations of OpenSim there is a need to make a loopback of your grid’s IP address for everything to work properly. Many home routers such as Apple’s AirPort Express, Airport Extreme and the TimeMachine models of the same support automatic loopback. In this case there is no need to do anything as it should work “right out of the box”.
					&lt;/p&gt;&lt;p&gt;However, many home routers don’t support automatic loopback, and business and enterprise routers usually don’t. 
					&lt;/p&gt;&lt;p&gt;Creating a loopback alias for your grid’s IP address on the servers OpenSim runs on can therefore be a necessity. 
					&lt;/p&gt;&lt;p&gt;Setting a loopback alias in terminal can be done with the command
					&lt;/p&gt;
					&lt;div class="first blockquote-container wide center"&gt;
						&lt;div style="" class="graphic"&gt;&lt;blockquote class="figure-content"&gt;
								&lt;p&gt;sudo ifconfig lo0 alias &amp;lt;your grid IP&amp;gt;&lt;/p&gt;
								
							&lt;/blockquote&gt;
						&lt;/div&gt;
					&lt;/div&gt;&lt;p&gt;Removing it is done with 
					&lt;/p&gt;
					&lt;div class="not-first-item blockquote-container wide center"&gt;
						&lt;div style="" class="graphic"&gt;&lt;blockquote class="figure-content"&gt;
								&lt;p&gt;sudo ifconfig lo0 -alias &amp;lt;your grid IP&amp;gt;&lt;/p&gt;
								
							&lt;/blockquote&gt;
						&lt;/div&gt;
					&lt;/div&gt;&lt;p&gt;The culprit is this command does not survive a reboot. The easiest way to overcome this is to create a plist and place it in /Library/LaunchDaemons
					&lt;/p&gt;&lt;p&gt;If your domain for the grid is mydomain.org and your IP address is 111.222.1.2 then the plist will look like this saved to the file org.mydomain.loopback.plist
					&lt;/p&gt;
				&lt;/div&gt;
			</description>
			<pubDate>Sat, 06 May 2017 21:08:13 +0200</pubDate>
			<guid>http://www.xmir.org/tech-talk/alias-the-loopback-address.html</guid>
            
			
		</item>
		<item>
			<title>Updated LSL language module for BBEdit</title>
			<link>http://www.xmir.org/tech-talk/updated-lsl-language-module.html</link>
			<description>
				&lt;div class="article-summary"&gt;&lt;p&gt;For many macOS users &lt;a href="http://www.barebones.com/products/bbedit/index.html" target="_blank"&gt;BBEdit&lt;/a&gt; is the editor of choice, and while there was a language module for the Linden Scripting Language (&lt;a href="http://wiki.secondlife.com/wiki/LSL_Portal" target="_blank"&gt;LSL&lt;/a&gt;) available, it had not been updated for a long time.  &lt;a href="https://www.dayturn.com/_media/lindenscriptlanguage_module.zip"&gt;Download&lt;/a&gt; an updated version, where all the additions to LSL through November 2016 have been added. 
					&lt;/p&gt;&lt;p&gt;In addition all &lt;a href="http://opensimulator.org/wiki/Category:OSSL_Functions" target="_blank"&gt;OSSL keywords&lt;/a&gt; and constants have been added.
					&lt;/p&gt;
					&lt;div class="first graphic-container wide center ImageElement"&gt;
						&lt;div class="graphic"&gt;
							&lt;div class="figure-content"&gt;
								&lt;!-- sandvox.ImageElement --&gt;&lt;img src="http://www.xmir.org/_Media/lsl-in-bbedit_med.png" alt="lsl in BBEdit" width="580" height="323" /&gt;
								&lt;!-- /sandvox.ImageElement --&gt;&lt;/div&gt;
						&lt;/div&gt;
					&lt;/div&gt;&lt;p&gt;The plist needs to be installed in ~Library/Application Support/BBEdit/Language Modules, and a restart of BBEdit will pick it up. 
					&lt;/p&gt;&lt;p&gt;&lt;a href="https://en.wikipedia.org/wiki/BBEdit" target="_blank"&gt;BBEdit&lt;/a&gt; has been around like “forever” and was first launched April 12, 1992 on Macintosh System Software 6. 
					&lt;/p&gt;&lt;p&gt;LSL is used for scripting virtual worlds in SecondLife and OpenSim grids. 
					&lt;/p&gt;&lt;p&gt;The language module can also be used with &lt;a href="http://www.barebones.com/products/textwrangler/" target="_blank"&gt;TextWrangler&lt;/a&gt;. 
					&lt;/p&gt;
				&lt;/div&gt;
			</description>
			<pubDate>Wed, 14 Dec 2016 21:58:51 +0100</pubDate>
			<guid>http://www.xmir.org/tech-talk/updated-lsl-language-module.html</guid>
            
			
		</item>
		<item>
			<title>Update your browser to keep making L$ payments</title>
			<link>http://www.xmir.org/tech-talk/update-your-browser-to-keep.html</link>
			<description>
				&lt;div class="article-summary"&gt;&lt;p&gt;Linden Lab recently made an &lt;a href="https://community.secondlife.com/t5/Featured-News/Update-Your-Web-Browser-to-Ensure-Secure-Payments/ba-p/3027363" target="_blank"&gt;announcement&lt;/a&gt; that a web browser supporting TLS v1.2 will be required from June 15, 2016 to access SecondLife’s web cashier to make payments or exchange L$. 
					&lt;/p&gt;&lt;p&gt;The most recent versions of Chrome, Firefox, Safari or Microsoft Edge all have this support, as does the most recent version of the SecondLife viewer in addition to Kokua 4.0.2 or higher. 
					&lt;/p&gt;&lt;p&gt;If in doubt, you can check your browser by visiting &lt;a href="https://community.secondlife.com/t5/Featured-News/Update-Your-Web-Browser-to-Ensure-Secure-Payments/ba-p/3027363" target="_blank"&gt;https://www.howsmyssl.com/&lt;/a&gt; or check the support pages of your favorite viewer for accessing the SecondLife grid. 
					&lt;/p&gt;&lt;/div&gt;
			</description>
			<pubDate>Sat, 21 May 2016 21:21:08 +0200</pubDate>
			<guid>http://www.xmir.org/tech-talk/update-your-browser-to-keep.html</guid>
            
			
		</item>
		<item>
			<title>Kokua 4.0.2 released</title>
			<link>http://www.xmir.org/tech-talk/kokua-402-released.html</link>
			<description>
				&lt;div class="article-summary"&gt;&lt;p&gt;Kokua version 4.0.2 is available for &lt;a href="http://www.sluniverse.com/php/vb/alternative-sl-clients/79177-kokua-viewer-5.html#post2251966" target="_blank"&gt;download&lt;/a&gt; with support for Linux 32 and 64 bit, OS X and Windows. 
					&lt;/p&gt;&lt;p&gt;This version brings functionality up to par with the Linden 4.0.2 version of the SecondLife viewer were this is a maintenance release with focus on fixing issues and bugs for mesh uploads, playing sounds at region crossings in addition to a number of smaller issues.  
					&lt;/p&gt;&lt;p&gt;The release has the following additions for this version:
					&lt;/p&gt;&lt;p&gt;• RLV version 2.9.16.1 from Marine Kelly
					&lt;/p&gt;&lt;p&gt;• Added a preference to Enable RLV at Preferences-&amp;gt;Kokua
					&lt;/p&gt;&lt;p&gt;• Added a menu and preference to disable jumping with the keyboard
					&lt;/p&gt;&lt;p&gt;• Fixed an issue where alt clicking on the avatar an moving the mouse would move or swing the camera a considerable distance. 
					&lt;/p&gt;&lt;p&gt;• Fixed a crash in the OS X version when receiving a teleport invitation on OpenSim 
					&lt;/p&gt;&lt;p&gt;• Corrected an issue with placing items of VAR regions on OpenSim
					&lt;/p&gt;&lt;p&gt;• Set the default hand pose to Relaxed when uploading an animation
					&lt;/p&gt;&lt;p&gt;Check the &lt;a href="http://blog.kokuaviewer.org/" target="_blank"&gt;Kokua Blog&lt;/a&gt; for the full announcement and the change log.
					&lt;/p&gt;&lt;/div&gt;
			</description>
			<pubDate>Tue, 01 Mar 2016 11:13:30 +0100</pubDate>
			<guid>http://www.xmir.org/tech-talk/kokua-402-released.html</guid>
            
			
		</item>
		<item>
			<title>Kokua 4.0.1 released</title>
			<link>http://www.xmir.org/tech-talk/kokua-401-released.html</link>
			<description>
				&lt;div class="article-summary"&gt;&lt;p&gt;Kokua version 4.0.1 is available for &lt;a href="http://www.sluniverse.com/php/vb/alternative-sl-clients/79177-kokua-viewer-5.html#post2251966" target="_blank"&gt;download&lt;/a&gt; with support for Linux 32 and 64 bit, OS X and Windows. 
					&lt;/p&gt;&lt;p&gt;This version brings functionality up to par with the Linden 4.0.1 version of the SecondLife viewer were the main focus is on replacing the dated QTWebkit framework with SL Chromium Embedded Framework.  For the first time it is also possible to select a mesh item attached to another avatar – handy for finding out who made the creation.  
					&lt;/p&gt;&lt;p&gt;The release has the following additions for this version:
					&lt;/p&gt;&lt;p&gt;• RLV version 2.9.16 from Marine Kelly
					&lt;/p&gt;&lt;p&gt;• Setting the Export permissions flag for items in OpenSim
					&lt;/p&gt;&lt;p&gt;• Do not let me fly
					&lt;/p&gt;&lt;p&gt;• Inventory filter for transferrable items only
					&lt;/p&gt;&lt;p&gt;There are additional bug fixes for areas such as cache issues, media volume, space navigator in addition to a large number of fixes from the Linden version.
					&lt;/p&gt;&lt;p&gt;The changes included in SecondLife versions &lt;a href="http://wiki.secondlife.com/wiki/Release_Notes/Second_Life_Release/4.0.1.309943" target="_blank"&gt;4.0.1.309943&lt;/a&gt; and  &lt;a href="http://wiki.secondlife.com/wiki/Release_Notes/Second_Life_Release/4.0.1.310054" target="_blank"&gt;4.0.1.310054&lt;/a&gt; are included in this version. 
					&lt;/p&gt;&lt;p&gt;Check the &lt;a href="http://blog.kokuaviewer.org/" target="_blank"&gt;Kokua Blog&lt;/a&gt; for the full announcement.
					&lt;/p&gt;&lt;/div&gt;
			</description>
			<pubDate>Tue, 01 Mar 2016 11:13:30 +0100</pubDate>
			<guid>http://www.xmir.org/tech-talk/kokua-401-released.html</guid>
            
			
		</item>
		<item>
			<title>Mac users beware - your application updater could betray you</title>
			<link>http://www.xmir.org/tech-talk/mac-users-beware---your.html</link>
			<description>
				&lt;div class="article-summary"&gt;&lt;p&gt;Mac users need to be aware of a security issue with the &lt;a href="https://sparkle-project.org/" target="_blank"&gt;Sparkle&lt;/a&gt; open source updater that is used by many Mac applications for providing updates to newer versions. 
					&lt;/p&gt;&lt;p&gt;The issue can used for a main-in-the-middle attack when downloading and installing new updates. 
					&lt;/p&gt;&lt;p&gt;Of the commonly used applications using Sparkle are Teamviewer and the VLC Media Player
					&lt;/p&gt;&lt;p&gt;Along with a flawed Sparkle version, vulnerable apps must also be running an unencrypted HTTP channel to receive software updates from offsite servers. Nefarious users capable of capturing network traffic, perhaps over an unsecured Wi-Fi connection, can leverage the Sparkle exploit to run malicious code remotely on a target computer. The publication cited work from a software engineer called Radek, who confirmed the exploit affects apps running on the latest versions of OS X 10.11 El Capitan and OS X 10.10 Yosemite.
					&lt;/p&gt;&lt;p&gt;&lt;br /&gt;&lt;/p&gt;
					&lt;div class="first graphic-container wide center"&gt;
						&lt;div class="Movie graphic"&gt;
							&lt;div class="figure-content"&gt;
								&lt;!-- sandvox.YouTubeElement --&gt;
								&lt;div class="YouTubeElement"&gt;
									&lt;div class="video"&gt;
										&lt;iframe allowFullScreen="true" frameborder="0" id="youtube" mozallowfullscreen="true" src="//www.youtube.com/embed/16acap5hep4?rel=0" title="YouTube video player" webkitAllowFullScreen="true" width="580" height="326" class="graphic"&gt;&lt;/iframe&gt;
									&lt;/div&gt;
								&lt;/div&gt;
								&lt;!-- /sandvox.YouTubeElement --&gt;
							&lt;/div&gt;
						&lt;/div&gt;
					&lt;/div&gt;&lt;p&gt;&lt;br /&gt;&lt;/p&gt;&lt;p&gt;A list has been made on &lt;a href="https://github.com/sparkle-project/Sparkle/issues/717" target="_blank"&gt;Github&lt;/a&gt; where individuals identify applications that are found to be vulnerable. You may want to check the list and look for an update if you use one of the identified applications and versions.
					&lt;/p&gt;
				&lt;/div&gt;
			</description>
			<pubDate>Wed, 10 Feb 2016 15:51:34 +0100</pubDate>
			<guid>http://www.xmir.org/tech-talk/mac-users-beware---your.html</guid>
            
			
		</item>
		<item>
			<title>SecondLife kicks off new avatar with project Bento</title>
			<link>http://www.xmir.org/tech-talk/secondlife-kicks-off-new.html</link>
			<description>
				&lt;div class="article-summary"&gt;&lt;p&gt;Linden Lab announced today that SecondLife will get a new avatar skeleton with bones that enables finger, facial and tail animations in addition to the possibility of adding more arms and legs to an avatar. 
					&lt;/p&gt;&lt;p&gt;"We are introducing extensions to the standard Second Life Avatar Skeleton that give you dozens of new bones to support both rigging and animation, and accompanying new attachment points! This extended skeleton, which is fully backward compatible with existing avatars, rigging and animation, gives creators the power to build more sophisticated avatars than ever before.”
					&lt;/p&gt;&lt;p&gt;The new skeleton is made available to content creators through sample files and a project viewer and will add the following new bones to it:
					&lt;/p&gt;&lt;ul&gt;&lt;li&gt;&lt;span style="font-family: Georgia; color: rgb(50, 51, 51);"&gt;11 extra limb bones for wings, additional arms, or extra legs.&lt;/span&gt;&lt;/li&gt;&lt;li&gt;&lt;span style="font-family: Georgia; color: rgb(50, 51, 51);"&gt;6 tail bones&lt;/span&gt;&lt;/li&gt;&lt;li&gt;&lt;span style="font-family: Georgia; color: rgb(50, 51, 51);"&gt;30 bones in the hands (all 10 fingers!)&lt;/span&gt;&lt;/li&gt;&lt;li&gt;&lt;span style="font-family: Georgia; color: rgb(50, 51, 51);"&gt;30 bones for facial expressions&lt;/span&gt;&lt;/li&gt;&lt;li&gt;&lt;span style="font-family: Georgia; color: rgb(50, 51, 51);"&gt;2 other new bones in the head for animating ears or antennae&lt;/span&gt;&lt;/li&gt;&lt;li&gt;&lt;span style="font-family: Georgia; color: rgb(50, 51, 51);"&gt;13 new attachment points associated with the new bones&lt;/span&gt;&lt;/li&gt;&lt;/ul&gt;
					&lt;div class="first graphic-container wide center ImageElement"&gt;
						&lt;div class="graphic"&gt;
							&lt;div class="figure-content"&gt;
								&lt;!-- sandvox.ImageElement --&gt;&lt;img src="http://www.xmir.org/_Media/new_sl__skeleton_med.png" alt="new sl  skeleton" width="580" height="657" /&gt;
								&lt;!-- /sandvox.ImageElement --&gt;&lt;/div&gt;
						&lt;/div&gt;
						&lt;div style="" class="graphic"&gt;
							&lt;div class="figure-content caption"&gt;&lt;p&gt;The new skeleton imported into Cheetah 3D&lt;/p&gt;&lt;/div&gt;
						&lt;/div&gt;
					&lt;/div&gt;&lt;p&gt;Full details and download links to the project viewer and demo material in the &lt;a href="https://community.secondlife.com/t5/Featured-News/Introducing-Project-Bento-New-Bones-Added-to-Second-Life-Avatar/ba-p/2987206" target="_blank"&gt;SecondLife Blog&lt;/a&gt;. 
					&lt;/p&gt;&lt;p&gt;&lt;br /&gt;&lt;/p&gt;
				&lt;/div&gt;
			</description>
			<pubDate>Thu, 17 Dec 2015 10:19:19 +0100</pubDate>
			<guid>http://www.xmir.org/tech-talk/secondlife-kicks-off-new.html</guid>
            
			
		</item>
		<item>
			<title>Fonts for OpenSim dynamic textures</title>
			<link>http://www.xmir.org/tech-talk/fonts-for-opensim-dynamic.html</link>
			<description>
				&lt;div class="article-summary"&gt;&lt;p&gt;OpenSim has functions to generate dynamic textures, including text, but what fonts can it use?
					&lt;/p&gt;&lt;p&gt;For OpenSim on OS X (Server) it turns out that all fonts installed in /Library/System/Fonts in addition to fonts installed in ~/Library/Fonts for the user that OpenSim is running under is available to mono and therefore to OpenSim. 
					&lt;/p&gt;&lt;p&gt;A discussion on how to make fonts available for OpenSim running on Linux and Windows can be found in the &lt;a href="https://www.kitely.com/forums/viewtopic.php?f=8&amp;amp;t=3059&amp;amp;p=18085#p18085" target="_blank"&gt;Kitely Blog&lt;/a&gt;, where they also provide a script for testing the fonts available. 
					&lt;/p&gt;&lt;p&gt;A modified script that includes some of the Apple installed fonts is below. Place the script in a prim and scale it so the texture with the fonts becomes readable. Fonts existing on the system will show properly formatted, the rest will be set in the same type. 
					&lt;/p&gt;
					&lt;div class="first blockquote-container wide center"&gt;
						&lt;div style="" class="graphic"&gt;&lt;blockquote class="figure-content"&gt;
								&lt;p&gt;//fonttest MT&lt;/p&gt;&lt;p&gt;&lt;br /&gt;&lt;/p&gt;&lt;p&gt;list lFonts = ["Abadi MT","Agency FB","Algerian","Andale Mono","Arial","Arial Rounded MT","Avant-Garde","Baskerville Old Face","Bauhaus 93","Beesknees ITC","Bell MT","Berlin Sans FB","Bernard MT","BernhardMod BT","Bitstream Vera Sans","Bitstream Vera Sans Mono","Bitstream Vera Serif","Blackadder ITC","Blackletter 686 BT","Book Antiqua","Bookman Old Style","Bradley Hand ITC","Braggadocio","Britannic","Broadway","Brush738 BT","Brush Script MT","Brushwood Italic","Californian FB","Calisto MT","CaslonOpenface BT","Castellar","Centaur","Century Gothic","Century Schoolbook","Chiller","Colonna MT","Comic Sans MS","Cooper","Copperplate Gothic","Courier","Courier New","Curlz MT","Desdemona","Edwardian Script ITC","Elephant","Engravers MT","EngraversGothic BT","Eras ITC","Eurostile","Felix Titling","Flexure","Footlight MT","Forte","Franklin Gothic Book","Freestyle Script","French Script MT","Garamond","Georgia","Gigi","Gill Sans MT","Gloucester MT","Goudy Old Style","Goudy Stout","Gradl","Haettenschweiler","Harlow Solid Italic","Harrington","Helvetia","High Tower Text","Hippo","Humanist521 Bold Cn BT","Impact","Imprint MT Shadow","Informal Roman","Jokerman","Juice ITC","Kino MT","Kristen ITC","Kunstler Script","LcdD","Lucida Blackletter","Lucida Calligraphy","Lucida Fax","Lucida Handwriting","Lucida Sans","Lucida Sans Typewriter","Magneto","Maiandra GD","Matisse ITC","Matura MT Script Capitals","Mead","Mercurius Script MT","Mistral","Modern No. 20","Monotype Corsiva","MS Sans Serif","News Gothic MT","Niagara Engraved","Niagara Solid","&lt;/p&gt;&lt;p&gt;OCR A","Old English Text MT","Onyx","Onyx BT","Oz Handicraft BT","Palace Script MT","Palatino Linotype","Papyrus","Parchment","Perpetua Titling MT","Placard Condensed","Playbill","Poor Richard","Pristina","QuickType","Rage","Ransom","Ravie","Ribbon131 Bd BT","Rockwell","Script MT","ShelleyVolante","Showcard Gothic","Snap ITC","Stencil","Swiss721 BlkEx BT","Tahoma","Tempus Sans ITC","Terminal","Times New Roman","T-Roman","Transam","Trebuchet MS","Tw Cen MT","Utopia","Verdana","Viner Hand ITC","Vivaldi","Vladimir Script","Westminster","Wide Latin","Xerox Sans Serif","Xerox Serif","Utopia","Zapf Chancery",&lt;/p&gt;&lt;p&gt;&lt;br /&gt;&lt;/p&gt;&lt;p&gt;// Microsoft fonts&lt;/p&gt;&lt;p&gt;"Andale Mono", "Arial", "Arial Black", "Calibri", "Cambria", "Comic Sans MS", "Candara", "Consolas", "Constantia", "Corbel", "Courier New", "Georgia",  "Impact", "Times New Roman", "Webdings",&lt;/p&gt;&lt;p&gt;&lt;br /&gt;&lt;/p&gt;&lt;p&gt;// urw-fonts&lt;/p&gt;&lt;p&gt;"Bookman", "Zapf Chancery", "URW Gothic L", "Palatino", "New Century Schoolbook",&lt;/p&gt;&lt;p&gt;&lt;br /&gt;&lt;/p&gt;&lt;p&gt;// Apple fonts&lt;/p&gt;&lt;p&gt;"Helvetica","Palatino","Markerfelt","LucidaGrande","Avenir"&lt;/p&gt;&lt;p&gt;];&lt;/p&gt;&lt;p&gt;&lt;br /&gt;&lt;/p&gt;&lt;p&gt;string sContentType = "vector";&lt;/p&gt;&lt;p&gt;string sData = "";                               &lt;/p&gt;&lt;p&gt;string sExtraParams = "width:1024,height:1024";&lt;/p&gt;&lt;p&gt;integer i;&lt;/p&gt;&lt;p&gt;integer j;&lt;/p&gt;&lt;p&gt;integer k;&lt;/p&gt;&lt;p&gt;&lt;br /&gt;&lt;/p&gt;&lt;p&gt;draw_fonts(list fonts)&lt;/p&gt;&lt;p&gt;{&lt;/p&gt;&lt;p&gt;    sData += "PenSize 5; ";&lt;/p&gt;&lt;p&gt;    sData += "PenColour Red; "; &lt;/p&gt;&lt;p&gt;    sData += "FontSize 14; ";    &lt;/p&gt;&lt;p&gt;    for (i = 0; i &amp;lt;= llGetListLength(fonts); ++i)&lt;/p&gt;&lt;p&gt;    {&lt;/p&gt;&lt;p&gt;        j=i;&lt;/p&gt;&lt;p&gt;        k=1;&lt;/p&gt;&lt;p&gt;        if (i&amp;gt;=40)&lt;/p&gt;&lt;p&gt;        {&lt;/p&gt;&lt;p&gt;            j= i-40;&lt;/p&gt;&lt;p&gt;            k= 250;&lt;/p&gt;&lt;p&gt;        }&lt;/p&gt;&lt;p&gt;        if (i&amp;gt;=80)&lt;/p&gt;&lt;p&gt;        {&lt;/p&gt;&lt;p&gt;            j= i-80;&lt;/p&gt;&lt;p&gt;            k= 500;&lt;/p&gt;&lt;p&gt;        }&lt;/p&gt;&lt;p&gt;        if (i&amp;gt;=120)&lt;/p&gt;&lt;p&gt;        {&lt;/p&gt;&lt;p&gt;            j= i-120;&lt;/p&gt;&lt;p&gt;            k= 750;&lt;/p&gt;&lt;p&gt;        }                 &lt;/p&gt;&lt;p&gt;        //llOwnerSay((string)i+","+(string)j+","+(string)k+llList2String(fonts,i));&lt;/p&gt;&lt;p&gt;        sData += "MoveTo "+(string)k+","+(string)(20*j)+"; ";&lt;/p&gt;&lt;p&gt;        string name = llList2String(fonts,i);&lt;/p&gt;&lt;p&gt;        sData += "FontName "+name+"; Text "+name+";";&lt;/p&gt;&lt;p&gt;    }&lt;/p&gt;&lt;p&gt;    osSetDynamicTextureData("", sContentType, sData, sExtraParams, 0);&lt;/p&gt;&lt;p&gt;}&lt;/p&gt;&lt;p&gt;&lt;br /&gt;&lt;/p&gt;&lt;p&gt;default&lt;/p&gt;&lt;p&gt;{&lt;/p&gt;&lt;p&gt;    state_entry()&lt;/p&gt;&lt;p&gt;    {&lt;/p&gt;&lt;p&gt;        draw_fonts(lFonts);&lt;/p&gt;&lt;p&gt;    }&lt;/p&gt;&lt;p&gt;}&lt;/p&gt;
								
							&lt;/blockquote&gt;
						&lt;/div&gt;
					&lt;/div&gt;&lt;p&gt;&lt;br /&gt;&lt;/p&gt;
				&lt;/div&gt;
			</description>
			<pubDate>Fri, 11 Dec 2015 20:27:59 +0100</pubDate>
			<guid>http://www.xmir.org/tech-talk/fonts-for-opensim-dynamic.html</guid>
            
			
		</item>
		<item>
			<title>How to prevent OS X Server from sleeping</title>
			<link>http://www.xmir.org/tech-talk/how-to-prevent-os-x-server.html</link>
			<description>
				&lt;div class="article-summary"&gt;&lt;p&gt;When running OpenSim on OS X Server – at least in grid mode, the thing you don’t want to happen is for the server to go to sleep or spin down the disks. For some reason this happened on one of my servers where the disk kept spinning down regardless of how the System Settings control panel was configured. 
					&lt;/p&gt;&lt;p&gt;To override the control panel, you can open a terminal session and type the following (with an administrator password):
					&lt;/p&gt;
					&lt;div class="first blockquote-container wide center"&gt;
						&lt;div style="" class="graphic"&gt;&lt;blockquote class="figure-content"&gt;
								&lt;p&gt;sudo pmset -a disablesleep 1&lt;/p&gt;
								
							&lt;/blockquote&gt;
						&lt;/div&gt;
					&lt;/div&gt;&lt;p&gt;&lt;br /&gt;&lt;/p&gt;
				&lt;/div&gt;
			</description>
			<pubDate>Fri, 11 Dec 2015 20:21:43 +0100</pubDate>
			<guid>http://www.xmir.org/tech-talk/how-to-prevent-os-x-server.html</guid>
            
			
		</item>
		<item>
			<title>Swift goes open source</title>
			<link>http://www.xmir.org/tech-talk/swift-goes-open-source.html</link>
			<description>
				&lt;div class="article-summary"&gt;&lt;p&gt;Unveiling the &lt;a href="https://swift.org/" target="_blank"&gt;Swift.org&lt;/a&gt; website Apple has fulfilled the promise they made at the WWDC 2015 to take the Swift programming language open source in 2015. 
					&lt;/p&gt;&lt;p&gt;"We want everyone to learn Swift as their primary language, and we want — when developers invest in Swift — to be able to use it everywhere from scripting to apps for mobile down to writing code in the cloud,” Apple’s senior Software VP Craig Federighi told The Next Web. "We think the best way to enable all of that is to open source it.”
					&lt;/p&gt;&lt;img src="http://www.xmir.org/_Media/swift-og_med.png" alt="swift-og" width="257" height="257" class="first narrow left graphic-container" /&gt;&lt;p&gt;Swift was first announced at the WWDC in 2014 and made available to Apple developers initially focussing on iOS development in version 1.0. Over the next year the language was improved and many of the initial shortcomings removed so when version 2.0 was introduced in 2015 it had developed to a system level language also with proper support of OS X, where the goal is also to address the enterprise world bringing Swift to the servers.  IBM has reportedly been "a major source" of feedback, and eager to use Swift to port mobile apps to cloud services.
					&lt;/p&gt;&lt;/div&gt;
			</description>
			<pubDate>Sun, 06 Dec 2015 11:04:52 +0100</pubDate>
			<guid>http://www.xmir.org/tech-talk/swift-goes-open-source.html</guid>
            
			
		</item>
		<item>
			<title>Kokua 3.8.6 has been released</title>
			<link>http://www.xmir.org/tech-talk/kokua-386-has-been-released.html</link>
			<description>
				&lt;div class="article-summary"&gt;&lt;p&gt;The Kokua viewer 3.8.6 has been released with availability for all platforms bringing the viewer  to parity with Second Life version 3.8.6.305981 and Marine Kelley’s RLV version 2.9.15.1
					&lt;/p&gt;&lt;p&gt;Highlights for this version are:
					&lt;/p&gt;&lt;ul&gt;&lt;li&gt;&lt;span style="font-family: Georgia; color: rgb(50, 51, 51);"&gt;SL Notifications Release 3.8.6 [1]&lt;/span&gt;&lt;/li&gt;&lt;li&gt;&lt;span style="font-family: Georgia; color: rgb(50, 51, 51);"&gt;SL Maintenance Release (viewer-bear) 3.8.5 [2]&lt;/span&gt;&lt;/li&gt;&lt;li&gt;&lt;span style="font-family: Georgia; color: rgb(50, 51, 51);"&gt;Upstream RLV version 2.9.15.1 See Real Restraint Blog&lt;/span&gt;&lt;/li&gt;&lt;li&gt;&lt;span style="font-family: Georgia; color: rgb(50, 51, 51);"&gt;Upstream RLV version 2.9.15 See Real Restraint Blog&lt;/span&gt;&lt;/li&gt;&lt;li&gt;&lt;span style="font-family: Georgia; color: rgb(50, 51, 51);"&gt;Kokua Team Contributions and Fixes&lt;/span&gt;&lt;/li&gt;&lt;li&gt;&lt;span style="font-family: Georgia; color: rgb(50, 51, 51);"&gt;Uploading a Blender generated dae, and NOT retaining material group order Bug 10326&lt;/span&gt;&lt;/li&gt;&lt;li&gt;&lt;span style="font-family: Georgia; color: rgb(50, 51, 51);"&gt;[OpenSim] Set Lag Meter Server section to operate at 11 fps.&lt;/span&gt;&lt;/li&gt;&lt;/ul&gt;&lt;p&gt;&lt;span style="font-family: Georgia; color: rgb(50, 51, 51);"&gt;Notifications are now shown in a separate floater and organized by category, where they also can easily be deleted. This is a welcome addition that reduce message clutter, particularly on login where group message notification could be overwhelming. &lt;/span&gt;&lt;/p&gt;
					&lt;div class="first graphic-container wide center ImageElement"&gt;
						&lt;div class="graphic"&gt;
							&lt;div class="figure-content"&gt;
								&lt;!-- sandvox.ImageElement --&gt;&lt;img src="http://www.xmir.org/_Media/notifications_med_hr.png" alt="notifications" width="467" height="334" /&gt;
								&lt;!-- /sandvox.ImageElement --&gt;&lt;/div&gt;
						&lt;/div&gt;
					&lt;/div&gt;&lt;p&gt;&lt;br /&gt;&lt;/p&gt;&lt;p&gt;More details and download links in the Kokua Blog &lt;a href="http://blog.kokuaviewer.org/2015/11/17/kokua-3-8-6-37336-released/" target="_blank"&gt;announcement&lt;/a&gt;.  Mac users can also download it from &lt;a href="https://www.macupdate.com/app/mac/55136/kokua-viewer" target="_blank"&gt;MacUpdate&lt;/a&gt;.
					&lt;/p&gt;&lt;p&gt;The Mac version of Kokua has been built with Xcode 7.1.1 resulting in a reduction of the frequency of &lt;a href="http://www.xmir.org/tech-talk/viewer-gpu-crash-fixed-in.html" target="_blank"&gt;GPU restart viewer crash&lt;/a&gt; when running on OS X 10.11.x.  The issue is under investigation by Apple Engineering for possible resolution. 
					&lt;/p&gt;
				&lt;/div&gt;
			</description>
			<pubDate>Wed, 18 Nov 2015 10:00:34 +0100</pubDate>
			<guid>http://www.xmir.org/tech-talk/kokua-386-has-been-released.html</guid>
            
			
		</item>
		<item>
			<title>Viewer GPU crash fixed in NVIDIA driver for El Capitan</title>
			<link>http://www.xmir.org/tech-talk/viewer-gpu-crash-fixed-in.html</link>
			<description>
				&lt;div class="article-summary"&gt;&lt;p&gt;If after upgrading to OS X 10.11 El Capitan you experience frequent crashes of the viewer, chances are the GPU is restarted by the system logging a message like this in Console (system.log). The issue has also been observed on OS X 10.10 Yosemite
					&lt;/p&gt;
					&lt;div class="first blockquote-container wide center"&gt;
						&lt;div style="" class="graphic"&gt;&lt;blockquote class="figure-content"&gt;
								&lt;p&gt;&lt;span style="font-size: 13px; font-family: Consolas;"&gt;25.10.2015 09.12.39,000 kernel[0]: NVDA(Graphics): Channel exception! Exception type = 0x1f Access Violation Error (MMU Error 2)&lt;/span&gt;&lt;/p&gt;
								
							&lt;/blockquote&gt;
						&lt;/div&gt;
					&lt;/div&gt;&lt;p&gt;Initially I thought it was an issue with a newly built test version of the Kokua viewer, but on further testing both the official SecondLife viewer, Singularity and Cool VL viewer all experience the same crash. 
					&lt;/p&gt;&lt;p&gt;I have found it to manifest itself in areas with high density of mesh items such as the Daley Bay sim in SecondLife, the Kitely Merchant exhibition or local sims used for testing. 
					&lt;/p&gt;&lt;p&gt;While Apple is working on correcting the issue, the fix is to install the &lt;a href="http://www.nvidia.com/download/driverResults.aspx/92173/en-us" target="_blank"&gt;NVIDIA Quadro and Geforce Mac OS X driver&lt;/a&gt; which will restore functionality. The only caveat is that the increased performance I have observed on El Capitan is lost, presumably because the NVIDIA driver does not support Metal the same way as the native OS X driver. 
					&lt;/p&gt;&lt;p&gt;If your Mac has integrated Intel graphics, installing this driver will not make a difference – if you even were allowed to install it. 
					&lt;/p&gt;
				&lt;/div&gt;
			</description>
			<pubDate>Sun, 25 Oct 2015 09:15:32 +0100</pubDate>
			<guid>http://www.xmir.org/tech-talk/viewer-gpu-crash-fixed-in.html</guid>
            
			
		</item>
		<item>
			<title>Kokua 3.8.4 released with RLV support.</title>
			<link>http://www.xmir.org/tech-talk/kokua-384-released-with-rlv.html</link>
			<description>
				&lt;div class="article-summary"&gt;&lt;p&gt;After another good development and testing period the Kokua viewer 3.8.4 has been released and is available for &lt;a href="http://blog.kokuaviewer.org/2015/09/28/kokua-3-8-4-37073-released/" target="_blank"&gt;download&lt;/a&gt; for both Mac, Linux and Windows users. 
					&lt;/p&gt;&lt;p&gt;This version brings Kokua up to parity with the SecondLife 3.8.4 viewer with support for uploading meshes with more than 8 materials per mesh, in addition to a number of improvements and bug fixes for uploading mesh. Meshes with more than 8 materials are also supported on OpenSim grids. 
					&lt;/p&gt;&lt;p&gt;This version also brings back RLV, and parity with Marine Kelly’s RLV version 2.9.14. There is also a separate build without RLV for all platforms. &lt;span style="font-size: 1.6em;"&gt;  &lt;/span&gt;
					&lt;/p&gt;&lt;p&gt;XMIR contributes to the viewer by doing the builds of the Mac version in addition to testing. 
					&lt;/p&gt;&lt;p&gt;The full &lt;a href="http://team-purple.sourceforge.net/wiki/Kokua:Release_Notes/Kokua_Release/3.8.4.37073" target="_blank"&gt;Release Notes&lt;/a&gt; has the details of all the changes.
					&lt;/p&gt;&lt;/div&gt;
			</description>
			<pubDate>Mon, 28 Sep 2015 21:52:43 +0200</pubDate>
			<guid>http://www.xmir.org/tech-talk/kokua-384-released-with-rlv.html</guid>
            
			
		</item>
		<item>
			<title>MOSES no longer to submit patches to OpenSim</title>
			<link>http://www.xmir.org/tech-talk/moses-no-longer-to-submit.html</link>
			<description>
				&lt;div class="article-summary"&gt;&lt;p&gt;After what can be described as a contentious period between the &lt;a href="http://militarymetaverse.org/" target="_blank"&gt;MOSES&lt;/a&gt; project that use OpenSim for training of US Army staff and OpenSim core developers, the project has in a statement to the opensim-dev mailing list stated they no longer will contribute patches to OpenSim.  
					&lt;/p&gt;
					&lt;div class="first blockquote-container wide center"&gt;
						&lt;div style="" class="graphic"&gt;&lt;blockquote class="figure-content"&gt;
								&lt;p&gt;The MOSES project is not suggesting, alluding, or hinting at anything.  I am stating for the record, based on our experiences with the code acceptance practices of the Open Simulator project, that the process is subjective.   &lt;/p&gt;&lt;p&gt;The MOSES project will longer submit patches.  This decision is based on the advice of one of the Open Simulator developers.  We will be working strictly from our public GitHub.  We will announce when code is ready for pulls.  You may do with it as you wish, and we will be available for consult should you want to modify it for inclusion in the Open Simulator codebase.  We are also writing a detailed "Open Sim PhysX API" document that you will find useful.  This decision allows for you to work at the pace you are accustomed to and it will not impact our schedule.&lt;/p&gt;&lt;p&gt;Although we are no longer submitting patches, if you work with us we can ensure the code that produced is in a state you would find immediately ingestible.&lt;/p&gt;&lt;p&gt;Good Luck.&lt;/p&gt;&lt;p&gt;&lt;br /&gt;&lt;/p&gt;&lt;p&gt;Douglas Maxwell, Ph.D.&lt;/p&gt;&lt;p&gt;Science and Technology Manager&lt;/p&gt;&lt;p&gt;Virtual World Strategic Applications&lt;/p&gt;&lt;p&gt;U.S. Army Research Lab&lt;/p&gt;&lt;p&gt;Human Research &amp;amp; Engineering Directorate&lt;/p&gt;&lt;p&gt;Simulation &amp;amp; Training Technology Center&lt;/p&gt;
								
							&lt;/blockquote&gt;
						&lt;/div&gt;
					&lt;/div&gt;&lt;p&gt;&lt;br /&gt;&lt;/p&gt;&lt;p&gt;MOSES have in the past submitted patches to refine statistics collection to more accurately reflect the real performance of the OpenSim server and is currently developing a new version of the &lt;a href="http://physxinfo.com/" target="_blank"&gt;PhysX&lt;/a&gt; physics engine that will be able to run on NVIDIA graphics cards, and in the future distributed on dedicated physics servers. PhysX is already used by the &lt;a href="http://inworldz.com/" target="_blank"&gt;InWorldz&lt;/a&gt; grid, but running on regular CPUs. Its performance has by many been seen to be superior to the current bulletsim physics plugin that is now standard in OpenSim. 
					&lt;/p&gt;&lt;p&gt;In addition the MOSES project has made available OAR archives of parts of their regions and content developed for training. XMIR’s Murat River Valley area contains 6 modified versions of these regions.  
					&lt;/p&gt;
				&lt;/div&gt;
			</description>
			<pubDate>Mon, 24 Aug 2015 11:17:06 +0200</pubDate>
			<guid>http://www.xmir.org/tech-talk/moses-no-longer-to-submit.html</guid>
            
			
		</item>
		<item>
			<title>Fix for LSL List operations</title>
			<link>http://www.xmir.org/tech-talk/fix-for-lsl-list-operations.html</link>
			<description>
				&lt;div class="article-summary"&gt;&lt;p&gt;A fix has been developed to List operations in LSL scripts that makes constructs like 
					&lt;/p&gt;
					&lt;div class="first blockquote-container wide center"&gt;
						&lt;div style="" class="graphic"&gt;&lt;blockquote class="figure-content"&gt;
								&lt;p&gt;myList += new_item;             // appended item with simplified syntax&lt;/p&gt;
								
							&lt;/blockquote&gt;
						&lt;/div&gt;
					&lt;/div&gt;&lt;p&gt;&lt;span style="font-family: Georgia; color: rgb(50, 51, 51);"&gt;behave as per the &lt;a href="http://wiki.secondlife.com/wiki/List" target="_blank"&gt;SecondLife Wiki&lt;/a&gt;. The fix means that existing scripts on OpenSim grids may have to be modified. The upside is that more scripts developed for SecondLife should be portable without rewriting.&lt;/span&gt;&lt;/p&gt;
				&lt;/div&gt;
			</description>
			<pubDate>Mon, 24 Aug 2015 11:10:57 +0200</pubDate>
			<guid>http://www.xmir.org/tech-talk/fix-for-lsl-list-operations.html</guid>
            
			
		</item>
		<item>
			<title>Kokua viewer 3.8.2 released</title>
			<link>http://www.xmir.org/tech-talk/kokua-viewer-382-released.html</link>
			<description>
				&lt;div class="article-summary"&gt;&lt;p&gt;After a good development and testing period the Kokua viewer 3.8.2 has been released and is available for &lt;a href="http://sourceforge.net/projects/kokua.team-purple.p/files/Kokua-3.8.2/" target="_blank"&gt;download&lt;/a&gt; for both Mac, Linux and Windows users. 
					&lt;/p&gt;&lt;p&gt;This version has been build with updated libraries and development tools such as Xcode and Visual Studio 2013 which has made it possible to give it functionality very close to Linden Lab’s SecondLife viewer in addition to OpenSim functionality. It also means it has all the bug fixes that is in the SecondLife version. 
					&lt;/p&gt;&lt;p&gt;The 3.8.2 version so not very rich on new OpenSim features but has new functionality like &lt;a href="http://wiki.secondlife.com/wiki/Linden_Lab_Official:Viewer-Managed_Marketplace_FAQ" target="_blank"&gt;Viewer Marketplace Listings&lt;/a&gt; and &lt;a href="https://community.secondlife.com/t5/Featured-News/Experience-Tools-Available-Now-For-Premium-Members/ba-p/2945616" target="_blank"&gt;Experience Tools&lt;/a&gt; making it a full fledged SecondLife citizen. With the enhanced build tools of Kokua, this release should be an attractive viewer for SecondLife Merchants. 
					&lt;/p&gt;&lt;p&gt;The current release does not have the RLV additions, which will be added later. Porting the RLV code to the new libraries and development tools is a bit more challenging explains Nicky Perian, the main developer of the Kokua viewer. 
					&lt;/p&gt;&lt;/div&gt;
			</description>
			<pubDate>Fri, 07 Aug 2015 10:50:20 +0200</pubDate>
			<guid>http://www.xmir.org/tech-talk/kokua-viewer-382-released.html</guid>
            
			
		</item>
		<item>
			<title>Source Management Tools</title>
			<link>http://www.xmir.org/tech-talk/source-management-tools.html</link>
			<description>
				&lt;div class="article-summary"&gt;&lt;p&gt;The moment you start working with viewer and OpenSim server code – or even configuration files for your servers and regions, the need for source management tools quickly arise.
					&lt;/p&gt;&lt;p&gt;An application that will handle both Git and Mercurial code repositories is &lt;a href="https://www.sourcetreeapp.com/" target="_blank"&gt;SourceTree&lt;/a&gt; from Atlassian.
					&lt;/p&gt;
					&lt;div class="first graphic-container wide center ImageElement"&gt;
						&lt;div class="graphic"&gt;
							&lt;div class="figure-content"&gt;
								&lt;!-- sandvox.ImageElement --&gt;&lt;img src="http://www.xmir.org/_Media/sourcetree-hero-mac-log_med.png" alt="sourcetree-hero-mac-log" width="580" height="292" /&gt;
								&lt;!-- /sandvox.ImageElement --&gt;&lt;/div&gt;
						&lt;/div&gt;
					&lt;/div&gt;&lt;p&gt;SourceTree is a front-end to command line based management of Git and Mercurial and helps take the mystery, and sometimes operational errors, out of managing repositories while giving you a much better view of what has and is happening to your code and revisions. 
					&lt;/p&gt;&lt;p&gt;SourceTree is free and available for both Mac and Windows users.
					&lt;/p&gt;
				&lt;/div&gt;
			</description>
			<pubDate>Fri, 07 Aug 2015 10:38:21 +0200</pubDate>
			<guid>http://www.xmir.org/tech-talk/source-management-tools.html</guid>
            
			
		</item>
		<item>
			<title>One badass query to fix a big glitch</title>
			<link>http://www.xmir.org/tech-talk/one-badass-query-to-the.html</link>
			<description>
				&lt;div class="article-summary"&gt;&lt;p&gt;During development of OpenSim version 0.8.1 a bug was introduced in the code where simulators running on Windows would format xml statements wrong so they became unreadable on simulators running on mono with Linux. The result being that content created on a Windows based grid would not rezz when transferred to a Linux based grid. The odd thing being that the same content will rezz when transferred to an OS X based grid with the simulators running on mono. 
					&lt;/p&gt;&lt;p&gt;The fix was in the OpenSim 0.8.2 development branch a few weeks ago to prevent new content being created with the wrong xml formatting, but the damage was already done as much content had both been created and re-uploaded after the OSGrid crash on simulators running Windows. Because of the very nature of Hypergrid content is being moved around, and the corrupted items are being spread between grids contaminating their asset databases. 
					&lt;/p&gt;&lt;p&gt;To combat the spreading a Perl script was developed and released yesterday, and while this worked for MySQL based asset servers, it had to be reworked for PostgreSQL. – Not so much because the script was compatible by just changing a line of code, but because the way assets is stored on the PostgreSQL version of the OpenSim asset server. 
					&lt;/p&gt;&lt;/div&gt;
			</description>
			<pubDate>Thu, 30 Jul 2015 11:35:05 +0200</pubDate>
			<guid>http://www.xmir.org/tech-talk/one-badass-query-to-the.html</guid>
            
			
		</item>
		<item>
			<title>Visual Studio Code to the rescue</title>
			<link>http://www.xmir.org/tech-talk/visual-studio-code-to-the.html</link>
			<description>
				&lt;div class="article-summary"&gt;&lt;p&gt;It is not often we recommend a Microsoft product, but when it comes to editing and working with the OpenSim source code, the beta version of Microsoft Visual Studio Code came to the rescue. 
					&lt;/p&gt;&lt;p&gt;Having an editor on OS X that is .NET aware made an improvement over UltraEdit, and it is very fast too. The side by side editing mode on a big screen comes handy, as is having access to full folder hierarchies on the left hand sidebar for quick navigation. 
					&lt;/p&gt;&lt;p&gt;With mono installed one can also compile and debug the code right from the editor. 
					&lt;/p&gt;&lt;p&gt;You can get the beta, which is also available in a 32-bit Linux version, and more information from &lt;a href="https://code.visualstudio.com/" target="_blank"&gt;here&lt;/a&gt;. 
					&lt;/p&gt;&lt;/div&gt;
			</description>
			<pubDate>Mon, 27 Jul 2015 08:38:00 +0200</pubDate>
			<guid>http://www.xmir.org/tech-talk/visual-studio-code-to-the.html</guid>
            
			
		</item>
 	</channel>
</rss>